Tag: VirtualBox

How to Install macOS Sierra 10.12 on VirtualBox in Windows PC?

Post author By Karar
Post date August 18, 2017
1 Comment on How to Install macOS Sierra 10.12 on VirtualBox in Windows PC?

The macOS Sierra released in the market with latest technology and features. Moreover, it helps you rediscover your best photos, work more seamlessly between devices, and free up valuable storage space. It also brings fun new ways to create super expressive messages. And now the files on your Mac are always right at your fingertips — whether you’re on your Mac, iPhone, or iPad. Of course, there are many more features which you would like to try. Also, there are tons of users who are trying to download & install macOS Sierra 10.12 on PC. So in this article, I ‘m going to show you 5 steps to install macOS Sierra on VirtualBox on Windows PC. As there are various ways to get install macOS Sierra, like installing on VMware, VirtualBox, PC and as we covered installing on VMware and this time we are going to install it on VirtualBox, which is amazing. Let’s get started.

Install MacOS Sierra 10.12 On VMware Step By Step

5 Steps to Install macOS Sierra 10.12 on VirtualBox in Windows PC

Before we get started, there are several key points, make sure you have full-filled the requirements and accomplished the primary steps from below.

Note: Before we begin installation, make sure you have enabled virtualization on your PC and VMware too. Here’s how to do it:-

Enable Intel VT-X & AMD Virtualization on PC and VMware

#Step 1: Download & full-fil the requirements

Required System

2GB Memory(RAM)
Number of Processors: 2
Hard Disk: 80GB
Graphics memory: 256 MB

Required files to download

Latest preview: 10.12 Final (16A323). September 20, 2016
Download Image:
Google Drive (One Full): https://goo.gl/pBVDXz
Google Drive (5 of 5): https://goo.gl/FZnro8

Oracle VM VirtualBox: https://goo.gl/l3wrf
Fix Download Limit: https://goo.gl/uLrJke

When the files downloaded, extract them and get ready for the installation.

Step 2# Create a New Virtual Machine

Now open VirtualBox and click on New or press “Ctrl + N” to create a new virtual machine. On the Virtual Machine page, describe the operating system name, type, version and click Next like the shot below.

Set your 50-60% memory size (RAM) for the virtual machine, as the minimum memory size should be 2GB or more.

On the Hard Disk window, select “Use an existing virtual hard disk file” then choose macOS High Sierra 10.13 extracted file and click open then click Create on the hard disk page.

Step 3#: Setup Secondary Settings

The secondary settings are the followings below:

Setup 50-60% of your PC (RAM)
Uncheck floppy
Increase video memory to 128mb

Step 4#: Add Code to Virtual Machine

After you’ve setup virtual machine thoroughly, now you’re ready to take the next step.

To add code to the virtual machine, copy the code from below and paste it on Wordpad. Now on the VirtualBox, click Settings on the virtual machine, and copy the name from the page and start replacing it with “Your VM Name” instantly like the shot below.

Code for Virtualbox 5.x.x:
cd "C:\Program Files\Oracle\VirtualBox\"
VBoxManage.exe modifyvm "Your VM Name" --cpuidset 00000001 000106e5 00100800 0098e3fd bfebfbff
VBoxManage setextradata "Your VM Name" "VBoxInternal/Devices/efi/0/Config/DmiSystemProduct" "iMac11,3"
VBoxManage setextradata "Your VM Name" "VBoxInternal/Devices/efi/0/Config/DmiSystemVersion" "1.0"
VBoxManage setextradata "Your VM Name" "VBoxInternal/Devices/efi/0/Config/DmiBoardProduct" "Iloveapple"
VBoxManage setextradata "Your VM Name" "VBoxInternal/Devices/smc/0/Config/DeviceKey" "ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc"
VBoxManage setextradata "Your VM Name" "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 1

Now close VirtualBox and open Command Prompt(CMD) as administrator and paste the code below and hit Enter.

When the Command Prompt opened, paste the code below by right click and hit Enter.

Stuck booting up or can’t change the screen or do you have another problem? No matter, here’s the solution, click the link below and try one the solution methods from the list.

Fix macOS High Sierra Problems on VMware/VirtualBox

#Step 5: Install macOS Sierra 10.12 on VirtualBox

When you’ve completed the step above, open VirtualBox and click Start on the virtual Machine.

The VM will start running and you’ll see some codes running, it will take 5-10 minutes, when it finished, on the first page you’ll see the Welcome page, choose your country and click Continue.

Select Your Keyboard layout and Continue.

On this page, select Don’t transfer any information now and Continue.

Sign In with Your Apple ID and if you don’t have an Apple ID and want to make one click the link below otherwise select Don’t sign in and Continue.

How to Create an Apple ID Without a Credit Card?

Read the Terms & Conditions and click Agree.

Create a Computer Account by filling out the required details and Continue.

The Diagnostics & Usage send usage to Apple, check if you want or uncheck and click Continue.

On this page, enable locations services to let the mac setup according to your region and click Continue.

The excellent Siri is on his way, to check out the great Siri, let the enable siri be checked and hit Continue.

Everything is done! It may take some time to create and setup your account, when finished, you’ll see the official macOS Sierra page on VirtualBox and you’re done.

Ok, that’s all. Hope you could install without any issue and if you got any issue, place it in the comments form. Feel free to share your opinions, thoughts about improvements of our article and website.

Stuck booting up or can’t change the screen or do you have another problem? No matter, here’s the solution, click the link below and try one the solution methods from the list.

Fix macOS High Sierra Problems on VMware/VirtualBox

When the macOS High Sierra installed successfully, now step through essential setting up your Mac after installation. Click the link below and follow the steps.

Perform Post-Installation Tasks On MacOS High Sierra

See next: How to Install macOS High Sierra 10.13 on VirtualBox?

Tags apple, Install Mac, MacOS, macOS Sierra, PC, VirtualBox, windows

Mac OS

Fix macOS High Sierra Problems on VMware/VirtualBox

Post author By Karar
Post date August 12, 2017
48 Comments on Fix macOS High Sierra Problems on VMware/VirtualBox

The numbers of installation macOS High Sierra on PC are perfectly high. While the installation process doesn’t work for some users is remarkable. Plus, there are various types of problems, which includes installing problem, graphics issues and much more. In our previous articles, we saw the problems of many users in the comment section or in my email even. At the time, I was busy and couldn’t reach to them. Moreover, many comments were amazing. That’s why I couldn’t answer one by one and solve them. But this time I will compensate the problems you got. Personally, I apologize and say sorry to those who commented below and I couldn’t answer. So, don’t be upset and put your comments again because this time we aren’t leaving your comments without response. Therefore, this time we’ve covered your problems and solve them here or if you had any problem not listed here,of course you can comment and we’ll solve it. So let’s move on.

See our hottest contents:-

Fix macOS High Sierra Problem on VMware

In this article, we’ve covered the problems from the comment section and will solve them here so if you had any of these problems, of course, you can find the solution here. At first, we will answer to the VMware Workstation users and fix the problems then we’ll head up to the VirtualBox.

1# The virtual machine stuck at Apple logo while booting and reboots again & again how to fix?

-> Please check your guest OS you’ve selected the appropriate one & try with step 4 & 5 again carefully.

2# I get an error when I go to play it. Says “Mac OS X is not supported with binary translation. To run Mac OS X, you need a host on which VMware Player supports Intel VT-x or AMD-V.

-> Please enable Intel VT-x in BIOS, here’s how to do it.

3# FaceTime has not received any video from the connected camera. Restarting your computer may fix this issue.

-> To fix this, open VMware and change USB Port to 2.0. Try!

4# The USB devices doesn’t work, as I already changed the compatibility from 3.0 to 2.0 do you have a fix for this?

-> Please check if you have enabled VMware USB Service, click Start button and search Services.

5# Hi, thank you for this article. Everything works except I don’t have the internet and I don’t know how to configure it, I have already installed VMware tools have you any idea?

-> Try reinstalling VMware Tools and it will work.

6# Is there any way to activate video acceleration? Or change the amount of video memory?
In the settings, it says the guest OS doesn’t support it.

-> You can install VM Tool. And the Virtual machine is working with 128 MB of VRAM.

7# Hi, VMWare tools isn’t supporting. It means after restart VMWare tool on the right hand of the desktop. Its pointer isn’t smooth and also can’t use full screen.

-> Hi. Because this is a new version. Open System Preferences – Security & Privacy then enable VM Tool to fix this problem.

8# Can I use the hardware for the VM like this:
RAM: 2602.6 MB
CPU: 4 Cores
And my real hardware is :
RAM: 4004 MB
CPU: Intel Core i5
is it ok?

-> OK, Set up 50-60% of your Ram and CPU.

9# I have an issue where it will only give me 1024×768 RES after VMware tools are installed.

-> You should open “System Preferences” then “Security & Privacy” then click “Allow VMware Tool.” Restart!

10# I have the same error with displaying as follows. Please help me to solve this immediately…..
VMware Workstation unrecoverable error: (vcpu-0)
vcpu-0:VERIFY vmcore/vmm/main/physMem_monitor.c:1178
A log file is available in “C:\Users\User\Documents\Virtual Machines\OS X 10.11\vmware.log”.
You can request support.
To collect data to submit to VMware support, choose “Collect Support Data” from the Help menu. You can also run the “VM-support” script in the Workstation folder directly.
We will respond on the basis of your support entitlement.

-> Just add smc.version = “0” on your Notepad.

11# Can I run macOS High Sierra on AMD PC?

-> No, hope you wait for the next.

12# attempted to startup from:
->EFI VMware Virtual SCSI Hard Drive (0.0) unsuccessful
->EFI VMware Virtual IDE CDROM DRive (IDE1:0) unsuccessful
->EFI Network…..

-> Please add smc.version = 0 without quotation marks and it will work.

Fix macOS High Sierra Problem on VirtualBox

1# Hello! I already run my macOS High Sierra, but I can’t control my mouse integration. How can I turn it on?

-> Install the VirtualBox Expansion pack first. Then I switched the USB setting to USB2. Make sure your pointing device is set to USB Tablet.

2# I have a problem installing on the virtual machine it is showing a blank screen I ran all the commands as directed.is there any way to fix it?

-> Hi. Close your VirtualBox and try step 5 again.

3# VBoxManage.exe: error: Failed to create the VirtualBox object!
VBoxManage.exe: error: Code CO_E_SERVER_EXEC_FAILURE (0x80080005) – Server execution failed (extended info not available)
VBoxManage.exe: error: Most likely, the VirtualBox COM server is not running or failed to start.

-> Hi. Check your VirtualBox version and try step 5 again!

4# When I turn on the machine I just get a black screen and nothing else

-> Please enable Intel VT-x in BIOS!

5# VBoxManage setextradata “MacOS” “VBoxInternal/Devices/efi/0/Config/DmiSystemProduct” “iMac11,3” when I entered this command it shows me an error too many parameters.

-> Yes, my friend! Enable Intel VT-x in BIOS.

6# Still cannot get it to work, getting the black screen on boot. I know that the settings have been applied correctly, as this is what I see in my macos_dev.vbox: And yet, nothing. VT-x is enabled. The CPU is the latest i7-7500U KobyLake. 16gb of RAM, NVidia GTX 970 4G video card, just black screen, nothing else.

-> Hi. Change your Chipset to PPIX3 or IHC9 and try again.

7# I got something further, like “Error allocating 0x17e7 pages at 0x00000000000108b000 alloc type 2; Error loading kernel cache (0x9); Boot Failed. Mac Boot; Book Failed. EFI DVD/CDROM”.

-> Yes, the solution is easy: instead of setting the “Version” to “El Capitan,” set it to MacOS 64-bit. Everything then works.

8# i5 6500
16 GB of ddr4
xfx rx 480 8gb
windows 10 pro 64 bit

-> Thanks. Install “VirtualBox Extension Pack” then open VirtualBox. Select your virtual machine and click “Setting then change USB to 2.0.

9# Hi there! I seem to be dealing with the same problems others are. I’m experiencing a continual boot screen, but nothing else. What should I do? I followed your instructions to the letter.

-> Hi. Check your Guest OS and Intel VT-x. Change your VRAM to 128 MB and try again!

See this if you have this problem:-

Fix VMware Unrecoverable Error Of OS X Virtual Machine

Ok, fine, hope it would solve your problem. If you have any further problem, just comment below, and we will solve it within here. If you have any ideas suggestions for improvement, feel free to share it with us.

Tags Fix, Fix macOS, MacOS, macOS High Sierra, VirtualBox, Vmware

Mac OS

How to Install macOS High Sierra 10.13 on VirtualBox?

Post author By Karar
Post date August 10, 2017
7 Comments on How to Install macOS High Sierra 10.13 on VirtualBox?

The biggest Mac update is you’ll ever see is out everywhere. The OS which is full of new technologies & features. There’s no avoiding in it, the High Sierra goes with the most updated and useful features. No matter, if you’re a photographer or internet marketer or else, surely, this is for you. Because everything you need is available with much improvements and secured. However, if you wish to install it on your PC or want to use it beside your Windows and give it a try, then this is for you. In this article, I’m going to show you how to install macOS High Sierra on VirtualBox. In fact, VirtualBox allows users to run nearly any operating system on a single machine and to freely switch between OS instances running simultaneously. Therefore, we will guide you, how can you install macOS High Sierra on VirtualBox free virtualization platform.

See more like this:

Download & Install MacOS High Sierra 10.13 On VMware In Windows

Install macOS High Sierra 10.13 on VirtualBox

#Step 1: Download & full-fil the requirements

Least System Required

2GB Memory(RAM)
Number of Processors: 2
Hard Disk: 80GB
Graphics memory: 256 MB

Least Files Required

Latest preview: 10.13.0 Beta (17A264c). June 5, 2017.

Download Link:
Google Drive (One Full): http://bit.ly/2vdhoqg
Fix Download Limit: http://bit.ly/2f7JPlj

Code for VirtualBox (New): http://bit.ly/2mhZtJt
VirtualBox 5.1.26: http://bit.ly/1nlDA5d

#Step 2: Extract the downloaded file

Once you have downloaded the macOS High Sierra file, extract it now.

#Step 3: Create a New Virtual Machine

Set a memory size (RAM) for the virtual machine, as the minimum memory size should be 2GB or you could increase it.

On the Hard Disk window, select “Use an existing virtual hard disk file” then choose macOS High Sierra 10.13 extracted file and click open then click Create on the hard disk page.

Step 4#: Setup Primary Settings

When the virtual machine created, click on Settings>System>uncheck floppy.

On the settings page, choose Display> Increase video memory to 128 MB and click Ok.

Step 5#: Add Code to Virtual Machine

All right! After you’ve setup virtual machine thoroughly, now you’re ready to take the next step. To add code to the virtual machine, copy the code from below and paste it on Notepad. Now on the VirtualBox, click Settings on the virtual machine, and copy the name from the page instantly and start replacing it with “Your VM Name” like the shot below.

Code for Virtualbox 5.x:
cd "C:\Program Files\Oracle\VirtualBox\"
VBoxManage.exe modifyvm "Your VM Name" --cpuidset 00000001 000106e5 00100800 0098e3fd bfebfbff
VBoxManage setextradata "Your VM Name" "VBoxInternal/Devices/efi/0/Config/DmiSystemProduct" "iMac11,3"
VBoxManage setextradata "Your VM Name" "VBoxInternal/Devices/efi/0/Config/DmiSystemVersion" "1.0"
VBoxManage setextradata "Your VM Name" "VBoxInternal/Devices/efi/0/Config/DmiBoardProduct" "Iloveapple"
VBoxManage setextradata "Your VM Name" "VBoxInternal/Devices/smc/0/Config/DeviceKey" "ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc"
VBoxManage setextradata "Your VM Name" "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 1

Now close VirtualBox and open Command Prompt(CMD) as administrator and paste the code below and hit Enter.

Stuck booting up or can’t change the screen or do you have another problem? No matter, here’s the solution, click the link below and try one the solution methods from the list.

Fix macOS High Sierra Problems on VMware/VirtualBox

#Step 6: Install macOS High Sierra 10.13 on VirtualBox

When you’ve completed the step above, open VirtualBox and click Start on the virtual Machine. The VM will start running and you’ll see some codes running, it will take 5-10 minutes, when it finished, on the first page you’ll see the Welcome page, choose your country and click Continue.

Select Your Keyboard layout and Continue.

On this page, select Don’t transfer any information now and Continue.

Sign In with Your Apple ID and if you don’t have an Apple ID and want to make one click the link below otherwise select Don’t sign in and Continue.

How to Create an Apple ID Without a Credit Card?

Read the Terms & Conditions and click Agree.

Create a Computer Account by filling out the required details and Continue.

This new express setup page works as location services and Continue.

The computer account will be created within few minutes and you’ll see the macOS High Sierra page.

Stuck booting up or can’t change the screen or do you have another problem? No matter, here’s the solution, click the link below and try one the solution methods from the list.

Fix macOS High Sierra Problems on VMware/VirtualBox

When the macOS High Sierra installed successfully, now step through essential setting up your Mac after installation. Click the link below and follow the steps.

Perform Post-Installation Tasks On MacOS High Sierra

Tags High Sierra, Install MacOS, MacOS, macOS High Sierra, VirtualBox

Android Mobile

How to Install Android 7.0 Nougat on VirtualBox Right Now?

Post author By Karar
Post date September 12, 2016
6 Comments on How to Install Android 7.0 Nougat on VirtualBox Right Now?

Every OS update tries us to catch every stop of it and discover what’s new in it. That’s what we try to gain it for testing and discovering its marvelous updates or features, but to do that you might have to wait until it completely comes inside your phone or computer, can you wait for it? or you want to go from another option instead. And that the second option is to install it on your PC in VirtualBox like installing Android 7.0 Nougat on VMware we did. As you have always used your phone means you’ve installed the updates on your phone and used it, how about installing it on your PC? Have you ever test the taste of your phone OS or new upcoming update OS on PC? Like we did it on VMware, this time again we’re going to install Android 7.0 Nougat on VirtualBox here within the steps shown to you.

How to Install Android 7.0 Nougat on VMware Step by Step?

Install Android 7.0 Nougat on VirtualBox Right Now

Create, Customize the Virtual Machine

1. To install Android 7 Nougat, you’ll need some files during the installation, here are they:

Download Android 7.0 Nougat ISO Image File

Download & Install VirtualBox 5.1

2. Now run VirtualBox and click on New, on the window describe the virtual machine and type like the shot and hit Next.

VirtualBox - Create Virtual Machine — VirtualBox – Create Virtual Machine

3. Specify the amount of memory your computer can catch up(Recommended 1GB) and click Next.

4. Just let it by default and go Next with creating a new virtual hard disk.

5. No need to do any changes, let the hard disk type VDI just hit Next.

6. At this point, let it dynamic because it’s beneficial for us to use everything, and continue by hitting Next.

7. Browse the location and name the virtual machine then click Create.

Install Android 7 Nougat on VirtualBox

All right, our virtual machine has created and now we’re ready to approach to our target be active and go carefully now until ending.

1. After hitting create, the VM will be created, now click on Settings and select Storage options and click on Remove icon, see the shot.

VirtualBox - Virtual Machine Settings — VirtualBox – Virtual Machine Settings

2. When removed, click on Add button and select Add IDE Controller.

3. On the controller, click on Add Hard disks icon and choose existing disk option.

4. Locate to C:/users/VirtualBox VMs>Select VDI(Virtual Disk Image file and click Open.

5. Here click on Add optical drives icon and click Leave empty.

6. Select the empty file and change the option drive option to IDE Secondary Master then click on the Disk icon >Choose Virtual Optical Disk File>Choose ISO Image file of Android Nougat.

7. Time to start the virtual machine hit Start button to boot up, when the screen appears, click on the screen and go down with the arrow keys on the Installation – Install Android -x86 to harddisk and hit Enter.

8. Select Create/Modify partitions like the same and hit Enter.

9. And No for GPT hit Enter.

10. In this page, just go on New with the arrow key for a new partition and hit Enter.

11. And select Primary type partition and hit Enter.

12. Just hit Enter for the partition disk size.

13. Here hit Enter on bootable to make the parition bootable.

14. In this page, go on Write and hit Enter to write partition table to disk. When you’ll be asked, type Yes and hit Enter.

15. Quit the partition by hitting Enter on it.

16. When the partition choosing page came up, just hit Enter, then in the file system choosing page, choose Ext4 and hit Enter.

17. Hit Enter on formatting partitition sda1.

18. Also, hit Enter on installing bootloader.

19. Yes to install EFI GRUB2.

20. Format the boot partition by hitting Enter.

21. And for installing system directory as read-write hit Enter for it.

And you’re done, just remove the disk from virtual drive and then Reboot it.

Surprise that’s Android 7 Nougat running on VirtualBox.

Install Android 7.0 Nougat on VirtualBox — Android-7-Nougat-Running-on-VirtualBox

All right, if you have any question or suggestion or idea regarding this you can tell me by comment.

Tags Android 7, Android Nougat, How to, Install Android, VirtualBox

Mac OS

How to Enable Intel VT-X & AMD Virtualization on PC, VMware, VirtualBox?

Post author By Karar
Post date April 28, 2016
3 Comments on How to Enable Intel VT-X & AMD Virtualization on PC, VMware, VirtualBox?

Most of the today’s computers includes hardware virtualization features that have lots of advantages like Server Consolidation – Means ten server applications can be run on a single machine at the same time, Testing and development – Enable us to test or deploy OS by virtualizing, Enhance reliability & security – Virtualization of systems help prevent system crashes due to memory corruption caused by software and many more. Not only it gives us these advantages but also it makes our work easier like installing OS, setup virtual machines and some more. That’s why this time I’ve decided to show you how to enable Intel VT-X & AMD virtualization on PC, VMware, VirtualBox, so let’s get started.

Related: Install macOS Mojave on VMware on Windows PC

Enable Intel VT-X Virtualization on PC

There are two ways to enable Virtualization technology on PC, – UEFI firmware, -BIOS here at the first we will take a look at enabling VT-x from firmware then we will move forward.

1. Go to Settings> Update & Security>Recovery and click on Restart Now under Advanced Start-up.

2. While restarting your computer, choose Troubleshoot>Advanced option>UEFI Firmware settings>click Restart.

Note: If you don’t have the UEFI Firmware settings then no problem, you’ll find the VT-x virtualization option in the BIOS or boot menu.

3. On the boot menu, navigate to Advanced options/Configuration and find out Intel Virtual Technology and enable it by pressing F6.

4. Now comes to the enable VT-X from BIOS, so power on or restart your computer if it’s powered on and while restarting when the first page appears press the BIOS key to enter into BIOS menu. When entered, select BIOS Setup and on the BIOS setup page select System configuration and you’ll find the Virtualization Technology option to enable, just press F6 to change it from disable to enable.

Here are the BIOS Key for your computer:

Manufacturer	BIOS/UEFI Key
ACER	Del, F2
ASUS	F9
COMPAQ	F10
DELL	F2
EMACHINES	Tab, Del
HP	Esc, F10, F1
INTEL	F10
LENOVO	F1, F2
SAMSUNG	F2
TOSHIBA	F1, F2, F3
SONY	F1, Esc, F12
PACKARD BELL	F1, Del
NEC	F2

Enable Virtualization (Intel VT-X) in Bios- Lenovo Idea Pad S400 Laptop — Enable Virtualization (Intel VT-X) in Bios- Lenovo

Enable Intel VT-X/AMD Virtualization on VMware

1. To enable Intel VT-X & AMD virtualization, open VMware and select the virtual machine you want to enable Intel/AMd virtualization for, then click on Edit virtual machine settings.

2. Now select the Processors option and you’ll see the Intel VT-X & AMD Virtualization enabling option beside and mark it if you want. Also, you can let the virtualization engine by default(Automatic), the automatic option uses the three options there when required and disable them when they aren’t needed.

Enable Intel VT-x/AMD Virtualization on VirtualBox

1. Open VirtualBox and select the virtual machine you want to enable Intel-AMD virtualization on and click on Settings.

2. Here, select the System tab and select Acceleration tab then you can see and enable Intel VT-x or AMD virtualization and click Ok.

Ok, that’s it, hope you would not have faced any problem, comment below if you have any problem.

Tags Intel VT-X, PC, VirtualBox, Vmware

5 Steps to Install macOS Sierra 10.12 on VirtualBox in Windows PC

#Step 1: Download & full-fil the requirements

Required System

Required files to download

Step 2# Create a New Virtual Machine

Step 3#: Setup Secondary Settings

Step 4#: Add Code to Virtual Machine

#Step 5: Install macOS Sierra 10.12 on VirtualBox

Fix macOS High Sierra Problem on VMware

Fix macOS High Sierra Problem on VirtualBox

Install macOS High Sierra 10.13 on VirtualBox

#Step 1: Download & full-fil the requirements

Least System Required

Least Files Required

#Step 2: Extract the downloaded file

#Step 3: Create a New Virtual Machine

Step 4#: Setup Primary Settings

Step 5#: Add Code to Virtual Machine

#Step 6: Install macOS High Sierra 10.13 on VirtualBox

How to Install Android 7.0 Nougat on VMware Step by Step?

Install Android 7.0 Nougat on VirtualBox Right Now

Create, Customize the Virtual Machine

Install Android 7 Nougat on VirtualBox

Enable Intel VT-X Virtualization on PC

Enable Intel VT-X/AMD Virtualization on VMware

Enable Intel VT-x/AMD Virtualization on VirtualBox