Android Oreo is the most powerful and latest operating system this year. The OS will be backbone of Android devices which will perform professionally and smartly. With all feedbacks, complaints, and comments, this time the Android has tried to full-fil the needs by update and much improvement on speed, display, power and more. To check out and test the latest Android, you’ll need to download and install it whether on your phone or PC. Like before, the Pixel and Nexus phones are the first flagships to install Android Oreo, while the other Android phones are expected to be next for it. If you don’t own a Pixel or Nexus and can’t wait for the update, then you’re in the right place. In this article, I’m going to show you how to install Android Oreo on PC step by step.
The Apples macOS Sierra has approached high version which is called “macOS High Sierra”. Unlike usual this time again, the OS is innovatively designed and focused on core features. Except this, there are tons of major changes and enhanced graphics level like its better photos, 5k resolution, and file system. These brillant features has attracted users and attempt them to install specially on PC. No worries, you can do it now, no need to wait if you’re on PC or Mac. If you are a Mac users, so you can download the macOS High Sierra 10.13 from App store but if you are PC user then you’ve got the chance to do it from the guide here. In our previous article, we downloaded the macOS High Sierra VMware Image. In this article, I’m going to show you how to install macOS High Sierra 10.13 on VMware in Windows 10, 8 or 7.
macOS High Sierra
Unlike before, this time, we’re covering every section of guiding users to get what they want from this article. As in our previous article, we downloaded macOS High Sierra 10.13 simply. Now we’re going to install macOS High Sierra on VMware in Windows. Except it, following your comments, if you had problems or errors during installation, we will cover and solve it if possible by us in an article, stay on and enjoy.
Important: Hey Folks, the next version of macOS is out, here’s you can find and really download + install, with the complete guide.
Install macOS High Sierra 10.13 on VMware in Windows
Before we get started, there are several points you need to make sure you have full-filled the requirements and accomplished the important notes from below.
Remember: Before we begin installation, make sure you have enabled virtualization on your PC and VMware too. Here’s how to do it:-
1. After download, the files, extract them in a folder.
Extract Files
2. Now open Unlocker208 and open ” win-install” and Run as administrator.
Unlocker208
#Step 3: Create a New Virtual Machine in VMware
1. Open VMware Workstation and click on “Create a New Virtual Machine” or simply press ” Ctrl + N” to open New Virtual Machine Wizard. When opened, let it by default and click Next.
New Virtual Machine Wizard
2. On this page, select “I will install the operating system later” and click Next.
Guest OS Installation
3. Yes, you’re right, select Apple Mac OS X and OS version then hit Next.
Select an OS
4. Personalize and select a preferred location for the virtual machine and click Next.
Name Virtual Machine
5. Here specify the disk capacity by storing virtual disk as single file and 40 gig-byte for maximum disk size then continue installation by hitting Next.
Specify Disk Capacity
6. On the finish line, customize hardware if you want and go for Finish.
Final View
#Step 4: Configure & Edit the Virtual Machine
1. When the virtual machine created, you’re ready to edit the VM, hit Edit virtual machine settings to continue.
Edit Virtual Machine
2. Remove the existing hard disk by selecting the hard disk and click Remove.
Virtual Machine Settings
3. After removing the hard disk, hit Add on the Virtual Machine Settings and follow the instructions from below.
Add Hardware: Hard Disk: Disk Type:
4. Here you need to select use an existing virtual disk and click Next.
Select a disk
5. Browse the MacOS High Sierra (VMDK) from the extracted folder that you had downloaded then click Finish then click Ok on virtual machine settings.
Select Exisiting Hard Disk
#Step 5: Edit the Virtual Machine & Insert Code
1. When you have finished configuration, now you need to edit the virtual machine and insert command from below. To do that navigate to virtual machine files and open “virtual machine configuration(VMX)” with Notepad like the shot below.
Open With Notepad
2. On the Notepad, insert the command below or you can copy and paste from below.
smc.version = “0”
Enter Command
#Step 6: Install macOS High Sierra 10.13 on VMware
Once you have completed the steps above, then you’re able to install it right now. To do that, press the power button to start the virtual machine. When the machine started, on the first screen you’ll see the welcome page, choose your country then click Continue.
If you encounter “Failed to open a session for the virtual machine” or “VT-x isn’t available” you may check out this.
Select Don’t transfer any information now and hit enter.
Transfer Information to this Mac
On this page, sign in with your Apple ID otherwise select Don’t sign in and Continue or if you don’t have an Apple ID and want to create one here’s how to do:-
that’s all. Hope you could install without error and if you got any issue, place it in comments form. We will reply as soon as possible also we will create another article based on your problems for other users if they got, so they can solve it quickly. Stuck booting up or can’t change the screen or do you have another problem? No matter, here’s the solution, click the link below and try one the solution methods from the list.
Notice that if you face boot manager problem or any other problems, check out the step #3 and use the code without quotation marks or you can try the whole tutorial once again if again not succeed, then try to check your laptop/PC if it’s not AMD, if it is then you can’t do it or if your system is Intel then go and check the steps clearly and check once again or do it on another computer.
When the macOS High Sierra installed successfully, now step through essential setting up your Mac after installation. Click the link below and follow the steps.
The new MacOS Sierra is out and has been installed on almost all of the Mac’s because it’s new features going to get better and better. While it has spirit everywhere, especially, Siri which is more compatible and smart and finds the best results for you. Moreover, you have the universal clipboard, auto unlocks with Apple Watch and much more. Sounds exciting? Do you think it’s only for Mac users or you can’t install it? ha, of course, no, because you can do them all just in Windows using VMware within some easy steps. However, as we have covered the previous OS X El Capitan installation on VMware, this time again we’re having a surprising gift for our users means we’ve covered this too, so let’s get started.
Hey, check out this fantastic latest macOS High Sierra installation guide
After finishing the steps above, now it’s time to begin start virtualizing and installing Mac OS Sierra. Let’s get started.
#1. Open File Explorer and navigate to unlocker208 extracted files and right click on win-install and select Run as administrator, when the windows ask your permission click Yes. This will unlock or start VMware services of Mac so that you can choose and install Mac on VMware.
Unlocker208
#2. Now open VMware and click on File>New virtual machine(Ctrl+N), when the new virtual machine wizard pops up, just click Next.
New virtual machine wizard
#3. In this step, you’ve to select I will install the operating system later and click Next.
Guest OS Installation
#4. Here you need to select Apple Mac OS X as operating system and choose 10.11 from OS X version then click Next.
Select an OS
#5. Customize your virtual machine name and location for the installation like the shot and hit Next.
Customize the VM
#6. Now you don’t need to do anything just hit Next due to we won’t use the drive for our installation.
Specify Disk
#7. Everything is ready now, customize hardware if needed or finalize the virtual machine settings creation by hitting Finish.
Ready to install
Step 2# Edit the Virtual Machine & Replace the VM Hard Disk
When the virtual machine created, point out your mouse on Edit virtual machine settings and click on it.
Notice: After the virtual machine has been created, don’t turn it on otherwise you might lose the virtual machine and begin the steps from the beginning.
Edit virtual machine settings
Now here you can increase memory, processor if your system allows you and then select Hard Disk option and click Remove. When the hard disk removed, click Add then select Hard Disk and click Next.
Virtual machine settings
On this page, let all things by default, just click Next.
Select a disk type
Here you need to select use an existing virtual disk and click Next.
Select a disk
Now browse the VMDK file of MacOS Sierra from the extracted folder that you had downloaded then click Finish then click Ok on virtual machine settings.
Select an existing disk
Step 3# Edit the Virtual Machine (VMX) & Write Down the Command
It’s time to edit the VMX file of the virtual machine, to do that navigate to the macOS Sierra virtual machine files you had created and right-click on it and open it with Notepad.
open the virtual machine with Notepad
When the file opened, scroll to the end and type the command down then press Ctrl+S to save it.
smc.version = “0”
Note: If you got the error later saying the value 0 in Smc.version = “0” is not valid, take away the quotations and it will work.
Smc.version = 0
Notepad
Stuck booting up or can’t change the screen or do you have another problem? No matter, here’s the solution, click the link below and try one the solution methods from the list.
All right and now what you’re going to do next is power on the VM by clicking on the button above Power on this virtual machine.
When the VM powered on, on the first screen you’ll see the welcome page, choose your country then click Continue. This installation is similar to other OS X installation, so just enjoy.
Welcome Page
Now choose a keyboard layout and hit Continue.
Keyboard Selection
Select Don’t transfer any information now and hit enter.
Transfer Information to this Mac
It’s your choice whether you allow or disallow location services, choose one and click Continue.
Enable Location Services
On this page, sign in with your Apple ID otherwise select Don’t sign in and Continue or if you don’t have an Apple ID and want to create one here’s how to do:-
Read the Terms and conditions fully and click Agree.
Terms & Conditions
Step #5 Personalize Your Mac
So let’s personalize our Mac by filling out the required details then Continue.
Create a computer account
Watch out, it isn’t finished it’s the final one, help Apple to improve its products and services automatically by having Diagnostics & usage just hit Continue.
Diagnostics & usage
After continuing, you’ll exactly be in MacOS Sierra and finally, you’ve got your final result.
Ok, fine that’s it, can’t install or got confused, check out our video below based on install MacOS Sierra on VMware step by step. Notice that if you face boot manager problem or any other problems, check out the step #3 and use the code without quotation marks or you can try the whole tutorial once again if again not succeed, then try to check your laptop/PC if it’s not AMD, if it is then you can’t do it or if your system is Intel then go and check the steps clearly and check once again or do it on another computer.
And don’t forget to install VMware tools when the installation has finished, go now:-
When the VMware tools installed, now step through setting up your mac which is essential after installation. Click the link below and follow the steps.