Bootable – Tactig

Installing or booting every operating system needs to create bootable USB whether OS X or any other. Of course, we’ve to make an installer drive for installing Mac OS X. It may sound simple or an easy task but make sure that it is much more complicated from installing OS X El Capitan on VMware, Mac or PC because Mac OS switches harder to use than Windows or Linux. It might be having more functionings due to its security that’s why Windows users can’t find it helpful & easy to work with. Actually, Mac is different from other OS that is making users more satisfied or support but it won’t make users install and use. No matter if its complicated or you don’t know or having a problem using it, here we will show you the latest updates and articles step by step to make you learn and get the best out of it.

Create Bootable USB OS X El Capitan Installer Drive

There are different ways to create bootable USB OS X Capitan installer drive but this is the easiest option to do even easier by command because it’s more complicated to do it with the buit-in app(terminal) by commands.

Before getting started, you will need to download Mac OS El Capitan latest version from App Store and also download latest UniBeast-6.1.1 from here directly, but the full resource you can find it here.

1. When the OS X El Capitan and Unibeast downloaded, open Disk Utility and click Erase then enter a name and select format, click Erase.

Notice: If you have used the USB in Windows Before, it will need to be erased and change the format.

2. Ok, when the USB erased click Done and again click on Erase then select the partition & format type like the shot, and click Erase.

3. When the USB erased completed, press Done, now open Unibeast and just click Continue.

4. Here you don’t do anything just click Continue.

5. On the license page, click Continue and select Agree to continue.

6. Now choose the USB Thumb drive you want to create bootable and click Continue.

7. At this point, select the OS installation (El Capitan) and click Continue.

8. Now select the bootloader configuration UEFI Boot Mode then click Continue.

9. On this page, you need to choose the appropriate Graphics Configuration(for the computer you want to install El Capitan) and click Continue.

10. It’s time to check all the settings you’ve done and click Continue then enter your password, click Ok.

Ok, after you’ve to continue, the booting process will start and also it will copy the Mac OS El Capitan on USB too, it will take time depending on your Mac. When the process completed, you will see the succeeded, just click Quit to exit Unibeast and start booting your computer by USB.

Ok, that’s all. Enjoyed doing this? If yes then click the share button or put a comment to celebrate it with all.

Installing an operating system is easy task to do, but before installing you need a USB or DVD drive. It’s important to have to do installation. Many users get stucked in this situation but don’t worry here its easy to do with the following steps.

To install an operating system on a PC which is installed windows or any other operating system is something hard to do as well its a bit confusing on how to create bootable USB drive for e.g; if you want to install Ubuntu on a windows then you have to create a USB drive in Ubuntu or if you want to install Windows on a Mac then you have to create a bootable USB drive in Mac and then install it. It’s different and difficult to do in your operating system. However, there are different ways to create bootable USB drive in your operating system but here in this guide, we will show you how to do it easily by the following procedure.

Create Bootable USB Stick in Windows

To create bootable USB drive for windows, make sure that your USB/DVD is at least 8GB or larger and working fine. You can also do it from our previous article based on How to Create Bootable USB Stick in Windows 7, 8 and 10?

Before start creating bootable USB stick download and install the Windows USB/DVD Download Tool, also you should have the Windows ISO image you want to install.

1. Insert the USB stick and open Windows USB/DVD Download Tool, browse the ISO file/source file and click Next.

2. Now choose the media type you want to create bootable whether USB device or DVD.

3. Specify if your USB or DVD is selected if it isn’t click the refresh tab and choose then click Begin copying.

When the copying process started, wait some minutes to let it complete. When the wizard completed close the wizard and your USB drive will be ready to use for installing the windows.

Note: While copying the files don’t take out the USB or turn off your PC otherwise your flash drive will be destroyed.

Create a Bootable USB Stick in Mac OS

To create bootable USB stick on Mac OS make sure that the USB drive is at least 8GB or larger and working fine.

Before start creating bootable download and install Diskmaker X and make sure that you have the Mac OS ISO image file you’re going to install.

1. Open DiskMaker X and choose the Mac OS edition you want to make USB bootable.

2. Now click on Select an OS X Installation and browse the ISO image file of the Mac OS.

3. Select the disk you want to make bootable, an 8 GB USB thumb drive or another kind of disk such as DVD or Memory.

4. Select the disk you want to make bootable and click Choose this disk.

5. Click Erase then create the disk to format the drive.

6. Click Continue to let the Mac ask for administrator privileges.

7. Wait for serveral minutes until the login page appears then login in it and click ok. It will take about 20 minutes to complete and when it completed just quit the page and restart your Mac.

After restarting your USB flash drive will be bootable successfully and you can use it to install Mac on any PC.

Create a Bootable USB Stick in Ubuntu/Linux

To create bootable USB stick on Ubuntu/Linux make sure that the USB drive is at least 8GB or larger and working fine.

Before start creating bootable, make sure that you have the ISO image file of the Ubuntu or Linux you want to install.

1. Insert the USB drive and open Startup Disk Creator.

2. Now click other and choose the ISO image file and click Make startup disk.

After copying the files, the USB will be bootable successfully and ready to use.

That’s all, if you have any question regarding this ask now.